Specifications

EPOS Control Codes POSjet
®
1500 Programmer's Guide
Page 210 Rev N Nov-10
Function Print Control Character EPOS ONLY
ASCII [ESC] ^ <n>
Hexadecimal 1BH 5EH <n>
Decimal <27> <94> <n>
Range 0 n 255
Description The [ESC] ^ <n> command allows characters from zero to 31 codes to be printed. During normal
operation, characters from zero to 31 are control characters. Control code translation is turned off
for the following character.
Function Insert Euro Character EPOS ONLY
ASCII GS # <n>
Hexadecimal 1DH 23H <n>
Decimal <29> <35> <n>
Description The GS # <n> command allows an application to replace any character in the currently active
character set with the Euro character. The character to be replaced is defined by <n>. For
example, if the currently active character set is code page 850 (multilingual) and the 0D5H
character is to be the Euro character, 1DH 23H replaces the character at 0D5H with the Euro
symbol.
Function Turn Color Mode ON/OFF
ASCII [ESC] r <n>
Hexadecimal 1BH 72H <n>
Decimal <27> <114> <n>
Range <n> = 0, 1, 48, 49
Description The [ESC] r <n> command turns on or off color mode. When <n> = 1 or 49, color mode is turned
on, and when <n> = 0 or 48, color mode is turned off. The default setting is <n> = 0.
Function Select Character Code Table
ASCII [ESC] t <n>
Hexadecimal 1BH 74H <n>
Decimal <27> <116> <n>
Range 0 n 5; <n> = 254, 255
Description The [ESC] t <n> command selects a page, <n>, from the character code table as follows. The
alphanumeric characters (20H to 7FH) are the same for each page. The graphic characters (80H to
FFH) are different for each page. The default setting is page 0.
<n>
Character Code Table
0
Page 0 [PC437 (U.S.A. and Standard Europe)]
1
Page 1 [PC850 (Multilingual)]
2
Page 2 [PC850 (Multilingual)]
3
Page 3 [PC860 (Portuguese)]
4
Page 4 [PC863 (Canadian-French)]
5
Page 5 [PC865 (Nordic)]
255
Page 255 [Space page]
Table 45 Character Code Table