Specifications

Control Codes POSjet
®
1500 Programmer's Guide
Page 156 Rev N Nov-10
POSjet
®
1500 Validation Operation
The POSjet
®
1500 is configured with a validation feature allowing up to 12 lines of print on a one-ply, inserted
form or check. Additionally, a check print function allows the full front or back to be printed. These operations may
be manually or host controlled.
Manual Validation
To enter manual validation mode, press the ―FORM‖ button. The Form LED will start to blink. This indicates the
printer is waiting for a form to be inserted. The operator may now insert a form into the printer's validation slot.
Upon sensing the form, the printer will automatically feed the form to the current validation slip stop. Any data sent
to the printer following this operation will be printed on the form.
Host Controlled Validation.
Host controlled validation uses the validation select command to initiate a validation operation. There are two
validation select commands. One positions the form to the current validation slip stop. The other command
positions the form to a specific number of lines based on the current printer settings.
The POSjet
®
1500 has the ability to print up to 5 inches on a narrow form by loading it into the printer past the
current slip stop.
Host Controlled Validation.
Host controlled validation uses the validation select command to initiate a validation operation. There are two
validation select commands. One positions the form to the current validation slip stop. The other command
positions the form to a specific number of lines based on the current printer settings. Also available in portrait mode
is a load to top of form command that positions the inserted form to the top most printable position.
Inserted forms are restricted to the following sizes:
Validation Form
Requirements
Portrait
Landscape
Width
Height
Width
Height
Max. (inch)
(mm)
2.75
69.8
8.75
222.3
8.75
215.9
11
279.4
Min. (inch)
(mm)
2.75
69.8
2.75
69.8
2.75
69.8
2.75
69.8
Max Print Area (inch)
(mm)
2.5
63.5
7.8
198.1
2.5
63.5
1.5
38.1
Table 37 Validation Form Requirements and Print Area