Specifications

Control Codes POSjet
®
1500 Programmer's Guide
Page 86 Rev N Nov-10
Operational Troubleshooting
Understanding Fault Indicators
The ERROR INDICATOR LIGHT is the primary fault indicator. It is always On or blinking if a fault has occurred.
Three types of faults exist
Fully-recoverable faults Paper out or cover open
Semi-recoverable faults Head Jam
Non-recoverable faults Component failure
Fully-recoverable and Status
A fully-recoverable error will restart printing exactly where it stopped when the error occurred. Printing will resume
after error has been properly addressed.
Semi-recoverable
A semi-recoverable error requires that the printer be reset or power cycled after the cause of the error is corrected
The amount of information lost is dependent on the type of error and the state of the information being processed.
Non-recoverable
A non-recoverable error will most likely produce information loss and may require a service call.
Indicator Light Blink Patterns
If during normal operation, the ERROR indicator is lit and the POWER indicator is blinking, a minor error occurred.
The POWER indicator shows the error by blinking a pattern. Pressing the * Button restarts the printer. Blink patterns
are defined as follows.
9
1 Blink (1 blink, pause) __█__________________█______
2 Blink (2 blinks, pause) __█__█_______________█__█___
3 Blink (3 blinks pause) __█__█__█___________█__█__█_
9
The blink rate is effected by the data received. The faster the data, the faster the printer blinks.