Setup guide

5-4
Using the Start Button
4. In the Scanner events list, make sure Start Button is selected.
5. To have an application open automatically when you press
the
a Start button, select the check box next to that application
in the Send to this application window, and clear the check
boxes of all the other applications.
To have your document scanned and sent to an application
with one press of the
a Start button, select Presto!
PageManager for EPSON, complete the steps in this section,
then proceed to “Making PageManager Settings” on page 5-5.
If you want to choose from a list of applications when you
press the
a Start button, select the check boxes of the
applications you want.
Note:
❏ Depending on the application, EPSON TWAIN Pro may also
open when you press the
a Start button.
❏ Some applications do not support linkage to scanners and
digital cameras. Linkage is available only with the applications
that appear in the Send to this application list.
6. To save your settings, click OK, then click OK again.
If you did not select Presto! PageManager for EPSON, or if you
selected multiple applications, close all applications and try
pressing the
a Start button on the scanner to confirm that
everything is set up correctly.
If you selected Presto! PageManager for EPSON only, see the
next section to make settings for scanning and sending the
scanned document to a specified application.