Setup guide

5-2
Using the Start Button
Overview of Start Button Features
When your scanner is connected directly to your computer, you
can set up the scanner’s
a Start button to operate in the following
ways:
❏ Open an application of your choice
(for Windows Millennium Edition, 98, and 2000 users only)
❏ Scan and send the scanned document to a specified
application
(if you have installed Presto! PageManager for EPSON from
the scanner software CD-ROM)
Note:
If you are using your scanner over a network, you cannot use the
scanner’s
a Start button in the ways described above.
If you are using Windows Millennium Edition, 98, or 2000, read
“Making Windows Millennium Edition, 98, and 2000 Settings” on
page 5-3 first.
If you are using Windows 95 or NT 4.0, read “Making
PageManager Settings” on page 5-5.