Setup guide

4-2

Using Your Scanner

Scanning Procedure

This chapter shows you how the scanner operates. The basic

procedure for scanning is as follows:

1. Turn on the scanner. (Keep in mind the “Power-on sequence”

on page 2-13.)

2. Place the document you want to scan on the document table.

(This is described in detail in the next section.)

3. Run the scanner software and scan. (See “Starting EPSON

TWAIN Pro” on page 4-7 for details on scanning.)

Placing a Document on the Scanner

Before scanning a document, remember to respect the rights of

first checking the copyright status.

1. Turn on the scanner by pressing the OPERATE

button. The

OPERATE

light comes on.

2. Turn on the PC and make sure that the scanner's READY

light

is on.

3. Open the document cover.

OPERATE light