Setup guide

2
Setting up the Scanner
2-13
Power-on sequence
Keep the following in mind every time you turn on your computer
and SCSI devices, including the scanner.
❏ Be sure to turn on the SCSI device which is connected at the
farthest end of the daisy chain first, then the second farthest
and so on, until finally your computer. If you attempt to use
a SCSI device which has been turned on after the computer,
it may not work properly, or the computer may not work
properly.
❏ For Windows 95, 98, 2000, or Millennium Edition users:
The first time you turn on the computer after turning on the
scanner, one of the following dialog boxes or similar may
appear.
Windows 95
Windows 98 Windows 2000