User`s manual

Reference Information 4-9
illustration below.) Be especially careful when slip paper is
wide and has the glue on the right or left edge, since it may not
feed in a straight line.
❏
Since the slip insertion detector uses a photo detector, paper
that has holes at the detector position, or is translucent, must
not be used. (See the illustration on the next page.)
Slip paper glued area
Slip insertion sensor position
Paper feed direction
OK to use Do not use Use carefully Use carefully
Glued area
Sub-slip feed
roller position
Form stopper
position
14.6mm
(.58")
3mm (.12")
2mm (.08")
Slip insertion
sensor position
U925_eng.book Page 9 Thursday, July 25, 2002 9:15 AM