Operator`s manual

5-22 Commands
Decimal279953
n
[Range] 0 ≤
n
≤ 255
[Description] Enables or disables the panel buttons.
• When the LSB of
n
is 0, the panel buttons are enabled.
• When the LSB of
n
is 1, the panel buttons are disabled.
[Notes] • When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
[Default]
n
= 0
ESC d
n
[Name] Print and feed
n
lines
[Format] ASCII ESC d
n
Hex 1B 64
n
Decimal 27 100
n
[Range] 0 ≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds
n
lines.
[Notes] • This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
[Reference]
ESC 2
,
ESC 3
ESC e
n
[Name] Print and reverse feed n lines
[Format] ASCII ESC e
n
Hex 1B 65
n
Decimal 27 101
n
[Range] 0 ≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds n lines in the reverse
direction.
[Notes] • The command is available only in standard mode.
• This command sets the print position to the beginning of the line.
• The setting values do not remain.
ESC
f
t1 t2
[Name] Set cut sheet wait time
[Format] ASCII ESC f
t1 t2
Hex 1B 66
t1 t2
Decimal 27 102
t1 t2
[Range]
t1
= 0
0 ≤
t2
≤ 64