Operator`s manual

Commands 5-21
[Range] 0 ≤
n
≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is
detected, using
n
as follows:
[Notes] • It is possible to select multiple sensors to stop printing. Then, if
any of the selected sensors detects a paper-end, the printer stops
printing.
• When a paper-end is detected, printing stops after printing and
feeding the current line. In this time, if the panel buttons are
disabled, the printer release the paper and waits the next paper
automatically.
[Default]
n
= 0
[Reference] ESC c 5
ESC c 5
n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5
n
Hex 1B 63 35
n
Bit Off/On Hex Decimal Function
0
Off 00 0 Undefined.
On 01 1 Undefined.
1
Off 00 0 Undefined.
On 02 2 Undefined.
2
Off 00 0 Undefined.
On 04 4 Undefined.
3
Off 00 0 Undefined.
On 08 8 Undefined.
4
Off 00 0 TOF sensor disabled.
On 10 16 TOF sensor enabled.
5
Off 00 0 BOF sensor disabled.
On 20 32 BOF sensor enabled.
6
Off 00 0 Undefined.
On 40 64 Undefined.
7
Off 00 0 Undefined.
On 80 128 Undefined.