Operator`s manual

Commands 5-13
Hex 1B 3D
n
Decimal 27 61
n
[Range] 0 ≤
n
≤ 3
[Description] Selects device to which host computer sends data, using
n
as follows:
[Notes] • When the printer is not selected, the printer ignores all received
data until it is selected by this command.
• Even if the printer is disabled, it may go off-line due to printer
operation.
[Default]
n
= 1
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to the
mode that was in effect when the power was turned on.
Bit Off/On Hex Decimal Function
0
Off 00 0 Printer disabled.
On 01 1 Printer enabled.
1
Off 00 0 Undefined.
On 02 2 Undefined.
2
Off 00 0 Undefined.
On 04 4 Undefined.
3
Off 00 0 Undefined.
On 08 8 Undefined.
4
Off 00 0 Undefined.
On 10 16 Undefined.
5
Off 00 0 Undefined.
On 20 32 Undefined.
6
Off 00 0 Undefined.
On 40 64 Undefined.
7
Off 00 0 Undefined.
On 80 128 Undefined.
17, 25,...) for the 12 ✕ 24 font.
[Reference]
HT