Operator`s manual

5-8 Commands
[Notes] • The printer can underline all characters (including the right-side
character spacing), but cannot underline the space set by an HT.
• When both double-height and double-width modes are selected,
quadruple size characters are printed.
• Only setting of underline mode specification have effect in page
mode.
• Only setting of 7 × 7 font specification have effect in page mode.
[Default]
n
= 0
ESC %
n
[Name] Select/cancel user-defined character set
[Format] ASCII ESC %
n
Hex 1B 25
n
Decimal 27 37
n
[Range] 0 ≤
n
≤ 255
[Description] Selects or cancels the user-defined character set.
When the Least Significant Bit (LSB) is 0, the user-defined character
set is cancelled.
When the LSB is 1, the user-defined character set is selected.
[Notes] • When the user-defined character set is cancelled, the internal
character set is automatically selected.
[Default]
n
= 0
[Reference] ESC &
ESC &
y c1 c2
[
X
[
d
]
y
✕
x
]
c2
-
c1
+1
[Name] Define user-defined characters
[Format] ASCII ESC &
y c1 c2
[
x
[
d
]
y
✕
x
]
c2
-
c1
+ 1
Hex 1B 26
y c1 c2
[
x
[
d
]
y
✕
x
]
c2
-
c1
+ 1
Decimal 27 38
y c1 c2
[
x
[
d
]
y
✕
x
]
c2
-
c1
+ 1
[Range]
y
= 1
32 ≤
c1
≤
c2
≤ 126
0 ≤
x
≤ 6 (5
✕ 7 font)
0 ≤
x
≤ 10 (7
✕ 7 font)
0 ≤
d1 ... dy
✕
x
≤ 255
[Description] Defines user-defined characters.
•The
y
specifies the number of bytes in the vertical direction.
•
c1
specifies the beginning character code for the definition, and
c2
specifies the final code. When only one character is desired, use
c1
=
c2
.
• The allowable character code range is from decimal code 32 to 126.
•
x
specifies the number of dots in the horizontal direction.