Operator`s manual

Commands 5-7
[Description] Sets the character spacing for the right side of the character.
[Notes] • The right-side character spacing for double-width mode is twice
the normal value.
• The character spacing is set in increment of half dot.
• In page mode, the actual dot positions shift by half dot.
• This command sets values independently in standard mode and
in page mode.
[Default]
n
= 0
ESC !
n
[Name] Select print mode(s)
[Format] ASCII ESC !
n
Hex 1B 21
n
Decimal 27 33
n
[Range] 0 ≤
n
≤ 255
[Description] Selects print mode(s) using
n
as follows:
Bit Off/On Hex Decimal Function
0
Off 00 0 Character font 5
✕ 7 selected.
On 01 1 Character font 7
✕ 7 selected.
1
Off 00 0 Undefined.
On 02 2 Undefined.
2
Off 00 0 Undefined
On 04 4 Undefined.
3
Off 00 0 Undefined.
On 08 8 Undefined.
4
Off 00 0 Double-height mode not selected.
On 10 16 Double-height mode selected.
5
Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6
Off 00 0 Undefined.
On 40 64 Undefined.
7
Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.