Service manual

Rev. B Appendix A-23
TM-U200 Series (Type B) Service Manual
Confidential
Case Unit Overall Exploded Diagram
This is the diagram that the changes described in Addendum 1, 2, and 3 are taken.
CPS-tite (M3 x 6)
CPS-tite (M3 x 6)
Auto-cutter
assembly
CBS-tite (M3 x 5)
Main cover assembly
CPT-B (M3 x12)
Hinge assembly
Guide roller
Upper case
CPT-B (M3 x12)
CPT-B (M3 x12)
CPT-B (M3 x12)
CPT-B (M3 x12)
CBS-tite (M3 x 5)
CPT-B (M3 x12)
Printer mechanism assembly
Near-end detector lever
(*) For the parallel interface, the CPS-tite ( M3 x 6 ) are used.
Switch panel
Near-end detector frame
Lower plate
CPT-B (M3 x12)
Spacer
Lead wire
ROM cover
assembly
CPS-tite (M3 x 6)
CPS-tite (M3 x 6)
Rubber foot
Rubber foot
CP(O) (M3 x 6)
Near-end detector
Lower case
Paper roll receive rollers
I/F circuit board
assembly
Connector plate
Auto-cutter
plate spring
Auto-cutter
fixing plate
Auto-cutter plate shaft
RE (3)
Auto-cutter
plate spring
shaft
assembly
Auto-cutter lock
lever
RE (2.3)
Auto-cutter
lock lever
spring
Hexagon lock screws (*)
Lower cutter plate
Upper plate
CBS-tite (M3 x 4)
Auto-cutter plate
CBB-tite (M2 x 8)
CP(0) (M3 x 6)
Auto-cutter cover
Main circuit board assembly
CP (O)
(M3 x 6)
CBS-tite
(M3 x 5)
Release
lever
CPS-tite (M3 x 6)