Service manual

1-4 Features and General Specifications Rev. B
Confidential
Paper
(*1) This dimension shows the distance from the manual cutter to the print position.
(*2)Values for the printing area are calculated (between dot centers) with the wire diameter (0.29 mm [.011
"
]).
Paper types:
Paper roll: Plain paper or pressure-sensitive paper
Paper roll width:
76 ± 0.5 mm (2.99 ± .020")
Paper roll maximum
diameter:
83 mm (3.27")
Paper roll core:
Unless there is an optional near-end detector, you cannot use a
paper roll with the core and paper glued together.
Normal paper:
Thickness: 1 sheet: 0.06 to 0.085 mm (.0024 to .0034")
Weight: 52.3 to 64 g/m
2
(13.9 to 17 lb)
(45 to 55 kg/1000 sheets/1091 x 788)
Pressure-sensitive paper
Original sheet + up to 1 copy sheet
Thickness: 1 sheet: 0.05 to 0.08 mm (.0020 to .0031")
Total thickness: 0.2 mm (.0079") or less
Recommended paper: Mitsubishi - carbonless paper (blue)
Top and middle sheets: N40Hi
paper thickness: 0.06 mm (.0024")
weight: 47.2 g/m
2
(12.6 lb)
Bottom sheet: N60
paper thickness: 0.08 mm (.0031")
weight: 68.0 g/m
2
(18.1 lb)
Figure 1-4 Printing area
Maximum of 200 dots, 400 positions
76 mm (2.99")
20.2 mm (0.79") (*1)
Cutting position (manual cutter)
[6.76 mm (0.27")]
(*2)
63.34 mm (2.49")
[5.9 mm (0.23")]
Cutting position (auto-cutter)
27 mm (1.063")