Service manual

Rev. B Features and General Specifications 1-3
TM-U200 Series (Type B) Service Manual
Confidential
Character dimensions, characters per inch, characters per line
NOTE: The default font is 7 x 9; the dot spacing between characters is either 3 half dots or 2 half dots, depending on
the setting of DIP switch 2-1.
Character Specifications
Character Structure
Horizontal x Vertical
Character
Structure
Character Set
Character
Dimensions
WxH
Dot Spacing
Between
Characters
Characters Per
Line (cpl)
Characters Per
Inch (cpi)
7 x 9 ANK 1.2 x 3.1 mm
(.047 x .122")
3 half dots 40 16
Graphics 1.7 x 3.1 mm
(.070 x .122")
04016
9 x 9 ANK 1.6 x 3.1 mm
(.063 x .122")
3 half dots 33 13.3
Graphics 2.0 x 3.1 mm
(.079 x .122")
0 33 13.3
7 x 9 ANK 1.2 x 3.1 mm
(.047 x .122")
2 half dots 42 17.8
Graphics 1.6 x 3.1 mm
(.063 x .122")
0 42 17.8
9 x 9 ANK 1.6 x 3.1 mm
(.063 x .122")
2 half dots 35 14.5
Graphics 1.9 x 3.1 mm
(.075 x .122")
0 35 14.5
Character sets:
Alphanumeric: 95
International: 32
Graphics: 128 x 8 pages
Character structure:
7 x 9 with 400 half-dot positions per line
9 x 9 with 400 half-dot positions per line
Figure 1-3 Character size (7 x 9 font example)
3.1 mm
(0.122")
2.4 mm
(0.094")
1.24 mm (0.049")
1.59 mm (0.063")
0.159 mm (0.006")
0.353 mm
(0.014")