Service manual

5-38 Disassembly, Assembly, and Adjustment Rev. B
Confidential
When you do not attach the release lever:
Attach the auto-cutter lock lever with the RE
(2.3); then attach the auto-cutter lock lever spring with the RE (2.3).
3. Align the auto-cutter plate assembly with the holes of the auto-cutter fixing plate.
4. Attach the auto-cutter plate assembly to the auto-cutter fixing plate. Make sure the holes for
the shafts of the auto-cutter plate assembly match the holes in the auto-cutter fixing plate.
Insert the hook end of the spring in the hole in the auto-cutter plate assembly first, and the
auto-cutter plate spring shaft and auto-cutter plate shaft in the holes of the auto-cutter fixing
plate and secure them with the RE (3). Attach the other side of the spring into the hook of the
auto-cutter fixing plate.
RE (2.3)
RE (2.3)
Auto-cutter lock lever
Auto-cutter lock lever spring
Auto-cutter plate spring
Hole for spring
Auto-cutter plate
Auto-cutter plate shaft
RE (3)
Auto-cutter plate assembly
Holes for shafts
Hook end of spring
auto-cutter
fixing plate
Hook of
spring shaft