User`s manual

16 TM-T88V-DT User’s Manual
English
Removing the Jammed Paper
When a paper jam occurs, never pull out the paper forcibly. Open the roll paper
cover and remove the jammed paper.
CAUTION:
Do not touch the thermal head and the frame on its side (indicated in the circle
in the illustration below) because it can be very hot after printing.
If the roll paper cover does not open, follow the steps below.
1. Turn off the printer.
2. Slide the cutter cover toward the front to open it as shown in the illustration
below.
3. Turn the knob until you see a triangle mark in the opening. This returns the
cutter blade to the normal position. There is a label near the cutter to assist
you.
Cutter cover
Knob
Triangle mark