User`s manual

12 TM-T88V-DT User’s Manual
English
Attaching the Power Button Cover
Attach the power button cover that comes with the product onto the power button
to prevent accidental operation of the power button. Follow the steps below to
attach the power button cover.
Note:
It is recommended to clean the area around the power button with a cloth moistened with
alcohol before you attach the cover.
1. Open the power button cover.
2. Peel off the backing paper.
3. Attach the power button cover as shown in the illustration below.
Turning On/Off the TM-T88V-DT
Use the power button (See the illustration of “Part Names” on page 7.) to turn on/
off the TM-T88V-DT. You can also turn on the TM-T88V-DT through the network.
The operating system of the TM-T88V-DT has a standby mode. The system can be
set so that the standby mode can be turned on and off with the power switch.
CAUTION:
❏ If you turn the product off, wait more than 10 seconds before you turn it on
again.
❏ When the product is turned off or when it is in the standby mode, do not
hold down the power button longer than 4 seconds.
Note:
Assign the functions to the power button through the operating system or BIOS.
Align the left edge of the
power button cover with
the right edge of the printer
reset button.
A
lign the inside edge of
the power button cover
with the upper edge of
the power button.
Power button
Printer reset button