Specifications

3-10
ESC \ Set relative print
position
Sets the print starting
position based on the
current position.
●●● ● ● ● ●
ESC a Select justification Aligns all the data in
one line to a specified
position.
●●● ●● ● ● ● ●
ESC c 0 Select paper
type(s) for printing
Selects paper type(s) for
printing.
●● ●
●
●●
ESC c 1 Select paper
type(s) for
command
settings
Selects paper type(s) for
use with various
command settings.
●
●
●●
ESC c 3 Select paper
sensor(s) to output
paper-end signals
Selects paper sensor(s)
to output paper-end
signals.
OOOOOOOOO O O O O
ESC c 4 Select paper
sensor(s) to stop
printing
Selects the paper
sensor(s) that stops
printing when the paper
runs out.
●●●●●●●●● ● ● ● ● ●
ESC c 5 Enable/disable
panel buttons
Enables or disables the
panel buttons.
●●●●●●●●● ● ● ● ● ●●
ESC d Print and feed n
lines
Prints the data in the
print buffer and feeds n
lines.
●●●●●●●●● ● ● ● ● ●●
ESC e Print and reverse
feed n lines
Prints the data in the
print buffer and feeds n
lines in the reverse
direction.
●●
●●●●
Command Name Function
Supported Command
TM-
T85
TM-
T88/
T88M
TM-
L60II
TM-300/300M TM-U200 TM-
U375/
U375M
TM-
H5000/
H5000M
TM-
U925
TM-
U950/
U950M
TM-
295
TM-
215S
ABCDB D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.