User`s manual

8 TM-L90 User’s Manual
English
Installing the Printer
You must install this printer vertically (with the paper exit at the front).
If the paper exit is blocked by label backing paper accumulating on a table or other surface,
a paper jam or other problem may occur. Install the printer in a location, such as at the
edge of a counter, where the backing paper will not accumulate near the paper exit.
CAUTION:
Never install the printer in locations that receive direct sunlight. The diffuse
reflection from the roll paper may cause the label peeler detector to malfunction.
Note:
You can install it either on a flat surface, or you can hang it on a wall by using the
optional bracket (WH-10).
To hang the printer on the wall, see the Wall Hanging Bracket Set Installation
Manual provided with the WH-10 for instructions.
WARNING:
When hanging the printer on the wall with the hanging bracket set, be
sure to attach a connector cover to the printer.