Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Disassembly, Assembly, and Adjustment 6-57
TM-J8000/J8000P Technical Manual
Confidential
5. Make sure the
Tube, waste
is behind the tab shown below.
Figure 6-88 Inserting the Tube, waste behind the tab
6. Align the tab on the
Cartridge frame unit
into the hole on the tab shown below and install
the
Cartridge frame unit
. Do no pinch any tube and cables while you install the unit.
Figure 6-89 Setting the Cartridge frame unit
Tube, waste
Tab
Hole on the tab
Tab on the Cartridge
frame unit