Specifications

CONFIDENTIAL
Paper roll Print commands ESC d
Ver. 10.05 p. 78
ESC d
EXECUTING COMMAND
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Default] None
[Printers not featuring this command] None
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
■ The amount of paper fed per line is based on the value set using the line spacing command (ESC 2 or
ESC 3).
■ The maximum paper feed amount is 1016 mm {40 inches}. If the specified amount exceeds 1016 mm
{40 inches}, the paper feed amount is automatically set to 1016 mm {40 inches}.
■ After printing, the print position moves to the beginning of the line. When a left margin is set in standard
mode, the position of the left margin is the beginning of the line.
■ When this command is processed in page mode, only the print position moves, and the printer does not
perform actual printing.
■ This command is used to temporarily feed a specific line without changing the line spacing set by other
commands.