Specifications

CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 742
FS ( L <Function 67 >
[Name] Feed paper to the print starting position
[Format] ASCII FS ( L pL pH fn m
Hex 1C284C020043m
Decimal 28 40 76 2 0 67 m
[Range] (pL + pH × 256) = 2 (pL = 2, pH = 0)
m = 48, 49, 50
fn = 67
TM-L90: [with Peeler]
m = 50 [When the peeling issuing mode is selected]
48 ≤ m ≤ 50 [When the continuous issuing mode is selected]
[Models other than the above]
48 ≤ m ≤ 50
TM-P60: 48 ≤ m ≤ 50
[Range] Executes paper feed until the “print starting position“ specified in the paper layout reaches the print head
position.
[Notes]
■ Use this function by using “the first state of the line” in standard mode.
m Function
48 Feeds paper to the print starting position on the next label. However, if the paper is
in standby at the print starting position, the printer does not feed.
49 Feeds paper to the print starting position on the next label. However, if the paper is
in standby at the print starting position, the printer feeds paper to the next print
starting position.
50 Feeds paper to the label peeling position. However, if the paper is in standby at the
label peeling position, the printer feeds paper to the next label peeling position.
Feeds paper to the print starting position on the current label. However, if the
paper is in standby at the print starting position, the printer does not feed.