Specifications

CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 735
TM-L90
When it meets either of the following requirements, bit 0 of [Position Information B] becomes
“The print start operation of the label is possible now.” Set the paper layout (sb, sd, se) using
Function 49 of GS ( E.
(1)When position information A is “Standby at the label peeling position” (soon after executing
this command fn = 65) and when it meets either of the following requirements:
■ If (se ≤ sd), 24 mm {0.94 inch} ≤ (sb - se) and 3.6 mm {0.14 inch} ≤ (sd - se)
■ If (sd < se), 24 mm {0.94 inch} ≤ (sb × 2 - se) and 3.6 mm {0.14 inch} ≤ (sb + sd – se)
(2)When position information A is “Standby at the cutting position” (soon after executing this
command fn = 66) and when it meets either of the following requirements:
■ If (se ≤ sd), 14 mm {0.55 inch} ≤ (sb - se) and 3.6 mm {0.14 inch} ≤ (sd - se)
■ If (sd < se), 14 mm {0.55 inch} ≤ (sb × 2 – se) and 3.6 mm {0.14 inch} ≤ (sb + sd – se)
When it meets either of the following requirements, bit 1 of [Position information B] becomes
“The print start operation of the next label is possible.”
(1)When position information A is “Standby at the label peeling position” (soon after executing
this command fn = 65) and when it meets either of the following requirements:
■ If (se ≤ sd), 24 mm {0.94 inch} ≤ (sb × 2 – se) and 3.6 mm {0.14 inch} ≤ (sb + sd – se)
■ If (sd < se), 24 mm {0.94 inch} ≤ (sb × 3 – se) and 3.6 mm {0.14 inch} ≤ (sb × 2 + sd – se)
(2)When position information A is “Standby at the cutting position” (soon after executing this
command fn = 66) and when it meets either of the following requirements:
■ If (se ≤ sd), 14 mm {0.55 inch} ≤ (sb × 2 – se) and 3.6 mm {0.14 inch} ≤ (sb + sd – se)
■ If (sd < se), 14 mm {0.55 inch} ≤ (sb × 3 – se) and 3.6 mm {0.14 inch} ≤ (sb × 2 + sd – se)