Specifications

CONFIDENTIAL
Paper roll Counter printing commands GS C 0
Ver. 10.05 p. 705
GS C 0
SETTING COMMAND
[Name] Select counter print mode
[Format] ASCII GS C 0 nm
Hex 1D 43 30 nm
Decimal 296748nm
[Range] 0 ≤ n ≤ 5
0 ≤ m ≤ 2, 48 ≤ m ≤ 50
[Default] n = 0, m = 0
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-P60, TM-U230, TM-U220
[Description] Selects the print format for the serial number counter value (the number of printed digits and the print
position within the entire range of printed digits).
• n specifies the number of digits to be printed.
• m specifies the layout within the specified range of printed digits, as follows:
[Recommended Functions]
This command is supported by some printer models but may not be supported by future models.
Future models will not support counter value.
n Function
0 Prints the actual digits indicated by the number value.
1-5 Prints the last n digits of the serial number.
m Justification Layout within digits less than those specified
0, 48 Align right Adds spaces to the left if the digits are less than those
specified.
1, 49 Align right Adds 0 to the left if the digits are less than those specified.
2, 50 Align left Adds spaces to the right if the digits are less than those
specified.