Specifications

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 632
GS ( E pL pH fn d1 d2 d3 <Function 2>
[Name] End the user setting mode session
[Format] ASCII GS ( E pL pH fn d1 d2 d3
Hex 1D 28 45 04 00 02 4F 55 54
Decimal 294069 40 2 798584
[Range] (pL + pH × 256) = 4 (pL = 4, pH = 0)
fn = 2
d1 = 79
d2 = 85
d3 = 84
[Description] Ends the user setting mode, and performs a software reset.
[Notes]
■ This function is performed when the printer is in user setting mode.
■ After the software reset, the printer goes into the power on state.
■ Executing this function enables setting values set in user setting mode (such as memory switch or
customize value).
■ Be sure to execute this function after changing all the setting values.