Specifications

CONFIDENTIAL
Paper roll Customize commands GS ( C
Ver. 10.05 p. 616
GS ( C pL pH m fn b c1 c2 d1...dk <Function 1>
[Name] Store the data in the specified record
[Format] ASCII GS ( C pL pH m fn b c1 c2 d1...dk
Hex 1D 28 43 pL pH 00 fn 00 c1 c2 d1...dk
Decimal 294067pL pH 0 fn 0 c1 c2 d1...dk
[Range] 6 ≤ (pL + pH × 256) ≤ 65535 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255)
m = 0
fn = 1, 49
b = 0
32 ≤ c1 ≤ 126
32 ≤ c2 ≤ 126
32 ≤ d ≤ 254
k = (pL + pH × 256)−5
[Description] Stores the data (d1... dk) as the record specified by the key codes (c1, c2) in the NV user memory.
• When the specified record already exists, the data is overwritten.
• A terminator is automatically assigned.
[Notes]
■ In standard mode, this command is valid only at the beginning of the line.
■ You cannot include macros with this command, so do not use this command while defining macros.
■ You cannot use this command when the NV user memory does not have enough capacity to store the
specified records. The available capacity is confirmed by Function 4.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T70, TM-L90, TM-P60, TM-U220
TM-J2000/J2100, TM-T90, TM-T70, TM-L90, TM-U220
This function uses the “data quantity (k) + number of control information data (3 byte)” area for
execution.