Specifications

CONFIDENTIAL
Paper roll Miscellaneous commands GS z 0
Ver. 10.05 p. 493
GS z 0
SETTING COMMAND
[Name] Set online recovery wait time
[Format] ASCII GS z 0 t1 t2
Hex 1D7A30 t1 t2
Decimal 29 122 48 t1 t2
[Range] 0 ≤ t1 ≤ 255
0 ≤ t2 ≤ 255
[Default] t1 = 6, t2 = 0
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60, TM-U220
[Description] Sets the online recovery wait time from the time a new roll paper is installed to when the printer goes online.
• This command sets the paper wait time to (t1 × 500 msec). When t1 = 0, the paper wait time is set to 0.
• This command sets the recovery confirmation time to (t2 × 500 msec). When t2 = 0, the recovery
confirmation time is canceled.
[Notes]
■ The printer is in the paper wait time status after loading the paper. During this time, the printer performs
the following:
• The paper out LED is off.
• Paper can be fed by pressing the paper feed button.
• The printer is in the recovery confirmation time after the paper wait time (t1 × 500 msec) has elapsed.
• The printer can be set online by DLE ENQ (n = 0).
■ When the paper wait time is set to 0 (t1 = 0), the printer is in the recovery confirmation status immediately
after the paper loading.
■ In the recovery confirmation status, the printer performs the following:
• The paper out LED blinks.
• The printer recovers online by pressing the paper feed button. Paper cannot be fed by pressing the
paper feed button.
• The printer recovers online after the recovery confirmation time (t2 × 500 msec) has elapsed.