Specifications

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( Q
Ver. 10.05 p. 460
[Notes]
With this command, the function is decided by the function code (fn). The detailed operation differs with
each function.
[Model-dependent variations] TM-P60
TM-P60 with Peeler supports this function.
Program example
PRINT #1, CHR$(&h1B);"L"; ← Select page mode
PRITN #1, CHR$(&h1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);
PRITN #1, CHR$(144);CHR$(1);CHR$(88);CHR$(2);
PRINT #1, CHR$(&h1B);"T";CHR$(0);
← Select print direction
PRINT #1, CHR$(&h1D);"(Q";CHR$(14);CHR$(0);CHR$(49); ← <Function 49>
PRITN #1, CHR$(0);CHR$(0);CHR$(0);CHR$(0); ← Start coordinate
PRITN #1, CHR$(100);CHR$(0);CHR$(100);CHR$(0); ← End coordinate
PRITN #1, CHR$(1);CHR$(1);CHR$(48);CHR$(48);CHR$(1); ← Other designations
PRINT #1, CHR$(&h1D);"(Q";CHR$(12);CHR$(0);CHR$(48); ← <Function 48>
PRITN #1, CHR$(0);CHR$(0);CHR$(10);CHR$(0); ← Start coordinate
PRITN #1, CHR$(100);CHR$(0);CHR$(10);CHR$(0); ← End coordinate
PRITN #1, CHR$(1);CHR$(3);CHR$(48); ← Other designations
PRINT #1, CHR$(&h1B);CHR$(&hC); ← Batch printing
PRINT #1, CHR$(&h1B);"S"; ← Select standard mode
Print results