Specifications

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( P
Ver. 10.05 p. 456
<Function 48> GS ( P pL pH fn wxL wxH wyL wyH oxL oxH c
[Name] Printable area setting when page mode is selected
[Format] ASCII GS ( P pL pH fn wxL wxH wyL wyH oxL oxH c
Hex 1D 28 50 08 00 30 wxL wxH wyL wyH oxL oxH c
Decimal 294080 8 0 48 wxL wxH wyL wyH oxL oxH c
[Range] (pL + pH × 256) = 8 (pL = 8, pH = 0)
fn = 48
TM-P60: (wxL + wxH × 256) = 65535 (wyL = 255, wxH = 255)
1 ≤ (wyL + wyH × 256) ≤ 65535 (0 ≤ wyL ≤ 255, 0 ≤ wyH ≤ 255)
(oxL + oxH × 256) = 0 (oxL = 0, oxH = 0)
c = 1
[Default] TM-P60: (wxL + wxH × 256) = 65535 (wxL = 255, wxH = 255)
(wyL + wyH × 256) = 1200 (wyL = 176, wyH = 4)
(oxL + oxH × 256) = 0 (oxL = 0, oxH = 0)
c = 1
[Description] Sets the printable area when page mode is selected.
• Sets the horizontal size to [(wxL + wxH × 256) × horizontal and vertical motion units] from the
horizontal offset.
• Sets the vertical size to [(wyL + wyH × 256) × horizontal and vertical motion units] from the absolute
origin.
• Sets the horizontal offset to the [(oxL + oxH × 256) × horizontal and vertical motion units] position.
[Notes]
■ Use this function when the standard mode is selected.
■ In this function, horizontal indicates “perpendicular to the feed direction,” while vertical indicates “the
feed direction.”
■ A horizontal size or vertical size of 0 cannot be set.
■ The horizontal motion unit is used to calculate the horizontal size and horizontal offset.
■ The vertical motion unit is used to calculate the vertical size.