Specifications

CONFIDENTIAL
Paper roll Miscellaneous commands ESC ( A
Ver. 10.05 p. 407
• c specifies the beeps integrated beeper/ not beeps integrated beeper when specified offline is
occurred.
•1 ≤ t1 ≤ 50 specify beeping time (t1 × 100 ms).
t1 = 255 specify beeping time (infinity).
• t2 specify time for stop beeping (t2 × 100 ms).
[Notes]
■ This function repeats integrated beeper control of [(t1 × 100 ms) beep/ (t2 ✕ 100 ms) stop] when offline
factors have occurred. However, (t1 = 255) causes continuous beeping.
■ When the printer is offline, the integrated beeper will stops under any of the following conditions:
• The offline factor is cleared.
• The FEED switch is pressed.
• Reset or power off.
■ Setting of this function is enabled until reset or power off.
c Beeping method
0 Beeps integrated beeper
255 Does not beep the integrated beeper