Specifications

CONFIDENTIAL
Paper roll Miscellaneous commands DLE ENQ
Ver. 10.05 p. 383
The settings of [Msw8-1] and [Msw8-2] affect the recovery operation from the paper layout error. See
Function 3 of GS ( E.
Request of (n=0) can be used when GS ^ is executed or when the printer is in one of the following
status conditions when the peeling issuing mode is selected:
■ Waiting for the paper feed button to be pressed when the cover is closed.
■ Waiting for the paper feed button to be pressed to remove a label (when the label peeling
detector cannot detect paper due to sunlight).
TM-L90 models without Peeler:
BUSY condition is selected by memory switch [Msw1-3].
[Msw8-1][Msw8-2] Recovery operation from error
OFF When the printer recovers from the error, paper layout is
measured automatically and paper is fed to the label print
starting position and the paper layout stored in the non-
volatile memory is rewritten. Afterwards, the printer
operates following the paper layout automatically
measured. When the peeling issuing mode is selected, the
printer is in the waiting status for a label to be removed
when the paper layout is automatically measured;
therefore operators should remove the label.
ON When the printer recovers from the error, paper is fed to
the label print starting position. Paper layout stored in
the non-volatile memory is not changed. Change the
setting of the paper layout stored in the non-volatile
memory so that it matches the currently used paper
layout. See function 49 of this command for setting the
paper layout.