Specifications

CONFIDENTIAL
Paper roll Bar code commands GS k
Ver. 10.05 p. 349
• The HRI characters of the function characters (FNC1, FNC3) and the control characters (Hexadecimal =
00H - 1FH, 7FH / Decimal = 0 - 31, 127) are printed as spaces.
• The HRI characters of special characters (SP, "(," ")") are printed as the respective characters (SP, "(,"
")").
• The HRI character of special character ("*") prints a check digit.
• The HRI characters of bar code data ["{"+("(," ")," "*," "{")] are printed as the respective characters
("(," ")," "*," "{")
■ The range of data (d) that can be processed in each code set (CODE A, CODE B, CODE C) is shown in the
table below. Data where the character field is diagonal cannot be used. Transmit the 2-byte data shown in
the following table ([Hexadecimal = 7BH / Decimal = 123] + character code) from the host for the special
characters (FNC1, FNC3) and bar code data "(", ")", "*", and "{",.