Specifications

CONFIDENTIAL
Paper roll Bar code commands GS f
Ver. 10.05 p. 334
GS f
SETTING COMMAND
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] TM-J2000/J2100, TM-T90, TM-L90:
n = 0, 1, 48, 49 (Other than Japanese model)
0 ≤ n ≤ 2, 48 ≤ n ≤ 50 (Japanese model)
TM-T88IV, TM-T70: n = 0, 1, 48, 49
TM-P60: 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Default] n = 0
[Printers not featuring this command] TM-U230, TM-U220
[Description] Selects a font for the Human Readable Interpretation (HRI) characters when printing a bar code, using n as
follows:
[Notes]
■ The font set by this command is effective only for HRI character.
■ The composition of the character of each font is different depending on the model.
■ Configurations of Font A and Font B are different, depending on the printer model.
■ HRI characters are printed at the position specified by GS H.
■ HRI character is Human Readable Interpretation character indicated with bar code.
n Font of HRI characters
0, 48 Font A
1, 49 Font B
2, 50 Font C