Specifications

CONFIDENTIAL
Paper roll Bit-image commands FS p
Ver. 10.05 p. 197
TM-J2000/J2100, TM-T90, TM-T88IV
These printers support the graphics functions of GS(L/GS 8 L.
It is recommended that GS(L /GS 8 L be used.
Values of [Dot density] and [Maximum print area (dot)] are the same as the graphic function. (See
Function 69 of GS(L/GS 8 L.)
TM-U220
The modes selectable by m are as follows:
■ “Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right
angles) to the direction of paper feeding.
■ The maximum number of dots for printing depends on the setting of DIP switch [SW2-1] and
paper width. See the description of GS ( E <Function 5> for details.
dpi: dots per 25.4 mm (dots per inch)
Scaling
Vertical Horizontal
Dot
density Dot density
Maximum number of dots
SW2-1: ON SW 2-1: OFF
Paper Width:
76/ 69.5/ 57.5
(mm)
Paper Width
76/ 69.5/ 57.5
(mm)
× 1 72 dpi 160 dpi 385/ 360 / 297 400/ 360/ 300
×
2 -- 80 dpi 192/ 180/ 148 200/ 180/ 150