Specifications

CONFIDENTIAL
Paper roll Bit-image commands ESC ✻
Ver. 10.05 p. 185
TM-J2100 (two-color printing model)
The bit image modes selectable by m are as follows:
When both standard mode and page mode are selected (a starting position specified by ESC T is
upper left or lower right).
When the starting position specified by ESC T is upper right or lower left in page mode.
90° or 270° rotated bit-image data will be printed.
dpi: dots per 25.4 mm (dots per inch)
m Bit Image Mode
Vertical
dot
density
Horizontal
Dot
density
Set
adjacent
dots
Maximum number of dots
Paper width
82.5 mm
Paper width
76 mm
Paper width
69.5 mm
Paper width
57.5 mm
0 8-dot single-density 60 dpi 90 dpi Permitted 256 240 216 180
1 8-dot double-density 60 dpi 180 dpi Permitted 512 480 432 360
32 24-dot single-density 180 dpi 90 dpi Permitted 256 240 216 180
33 24-dot double-density 180 dpi 180 dpi Permitted 512 480 432 360
m Bit Image Mode
Vertical
Horizontal
dot
density
Dot
density
Set
adjacent
dots
Maximum number of dots
Paper width
82.5 mm
Paper width
76 mm
Paper width
69.5 mm
Paper width
57.5 mm
0 8-dot single-density 90 dpi Permitted 320 340 380 456 60 dpi
1 8-dot double-density 180 dpi Permitted 640 680 760 912 60 dpi
32 24-dot single-density 90 dpi Permitted 340 380 456 592 180 dpi
33 24-dot double-density 180 dpi Permitted 640 680 760 912 180 dpi