Specifications

CONFIDENTIAL
Paper roll Panel button command ESC c 5
Ver. 10.05 p. 141
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60, TM-U230,
TM-U220
TM-J2000/J2100
The panel buttons are PAPER FEED and CLEANING. The setting of this command does not affect the
CLEANING button.
When executing GS ^, if the PAPER OUT LED flashes, the PAPER FEED button is enabled regardless
of the setting of this command. Even if the button is pressed, paper cannot be fed.
When the roll paper end sensor detects a paper end, the PAPER FEED button is enabled regardless
of the setting of this command. Even if the button is pressed, paper cannot be fed.
When the cover is open or the roll paper end sensor detects a paper end, the PAPER FEED button is
disabled regardless of the settings of this command.
TM-T90, TM-T88IV
The panel button is FEED.
When executing GS ^, if the PAPER OUT LED flashes, the PAPER FEED button is enabled regardless
of the setting of this command. However, paper cannot be fed by the button.
When the PAPER OUT LED flashes with executing macro function, the FEED button is enabled
regardless of the setting of this command. Even if the button is pressed, paper cannot be fed.
When the cover is open or the roll paper end sensor detects a paper end, the FEED button is
disabled regardless of the settings of this command.
TM-T70
The panel button is FEED.
When the cover is open or the roll paper end sensor detects a paper end, the FEED button is
disabled regardless of the settings of this command.
Program Example for all printers
PRINT #1, CHR$(&H1B);"c5";CHR$(1); ← Disable panel buttons