Specifications

CONFIDENTIAL
Paper roll Character commands ESC &
Ver. 10.05 p. 101
■ Data (d) specifies a bit printed to 1 and not printed to 0. The dot pattern is in the horizontal direction from
the left side. Any remaining dots on the right side are blank.
■ The data to define a user-defined character is (y × x) bytes.
■ When the value of y, c1, c2, or x is out of the range, this command is canceled, and the following data is
processed as normal data.
■ This command can define user-defined characters for each font independently. To select a font, use ESC !
or ESC M.