Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
5
SHEET
4
TM-U210D EPSON TM- U210D Receipt
EPSON TM-H6000 Receipt
EPSON TM-H6000 Reduce35
EPSON TM-H6000 Slip
TM-H6000
EPSON TM-H6000 Endorse
EPSON TM-H6000II Receipt
EPSON TM-H6000II Reduce35
EPSON TM-H6000II Slip
TM-H6000II
EPSON TM-H6000II Endorse
TM-J2000/2100 EPSON TM- J2000/2100 Receipt
EPSON TM- J2000/2100 Reduce35
EPSON TM- J2000/2100 Reverse
EPSON TM- J7000/7100 Receipt
EPSON TM- J7000/7100 Reduce35
EPSON TM- J7000/7100 Slip
TM-J7000/7100
EPSON TM- J7000/7100 Endorse
EPSON TM-J8000 Receipt
EPSON TM-J8000 Reduce35
TM-J8000
EPSON TM-J8000 Slip
EPSON TM-H3000(R) Receipt
EPSON TM-H3000(R) Reduce35
TM-H3000R
EPSON TM-H3000(R) Slip
[Note]
! Ensure that the above-mentioned printer driver's printer spool is set to "Enable bi-directional support" when using
applications that utilize the status API with Windows 95/98. Failure to observe this will result in printing not being
possible from the application.
In addition to this, only parallel connections, serial connections, USB connections and Ethernet connections may be
used for connecting to printers currently supported.
! Parallel communications are recommended for high-speed printing. Even higher printing speeds can be attained by
setting the parallel port operations mode to the “ECP mode” with the BIOS settings on the computer in use. However,
there are certain computers with which printing will not be performed normally and the status API cannot be used when
the parallel operations mode is set to the ECP mode. In this event, cancel the ECP mode.
! Make the printer (Handshaking busy condition), always set the Receive buffer full (ON).
! When using a parallel connection with Windows2000/XP, use the ESD_LPTx port.
If ESD_LPTx is not displayed,
select LPTx.