Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
69
SHEET
68
3.49.BiSCNDeleteCroppingArea
[Function]
Deletes the cropping area set in the printer.
[Format]
int BiSCNDeleteCroppingArea( int nHandle, BYTE AreaNo)
[Argument]
int nHandle
Specifies the handle value of the printer executing the function. The return value in BiOpenMonPrinter() is specified.
BYTE bAreaNo
Specifies the number of the cropping area to be deleted. The valid setting range is 1 ~ 255. If 0 is set, all the cropping areas
are deleted.
[Return Values]
If execution is successful, 0 is returned. If an error occurs, the following error codes (negative values) are returned.
ERR_HANDLE The handle value specified for the printer is incorrect.
ERR_ACCESS Reading/writing with the printer is not possible (printing in progress).
ERR_NOT_SUPPORT Not supported
ERR_OFFLINE It was opened in the offline state, so it cannot be used until the online state is recovered.
[Caution]
•
If this function is executed for the TM-H6000II, which is not equipped with a scanner, it ends normally, but the cropping
area is not deleted.
[Supported Printers]
TM-H6000II with scanner