Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
66
SHEET
65
3.46.BiSCNClumpPaper
[Function]
Sets the cut sheet paper in the clamped state. After this function is executed, the printer is set in the cut sheet insertion wait
state, then the paper is clamped after it is inserted. If paper is already clamped at this time, nothing is done.
[Format]
int BiSCNClumpPaper( int nHandle)
[Argument]
int nHandle
Specifies the handle value of the printer executing the function. The return value in BiOpenMonPrinter() is specified.
[Return Values]
If execution is successful, 0 is returned. If an error occurs, the following error codes (negative values) are returned.
ERR_HANDLE The handle value specified for the printer is incorrect.
ERR_ACCESS Reading/writing with the printer is not possible (printing in progress).
ERR_NOT_SUPPORT Not supported
ERR_OFFLINE It was opened in the offline state, so it cannot be used until the online state is recovered.
[Caution]
•
If this function is executed for the TM-H6000II, which is not equipped with a scanner, it ends normally, but the paper is
not clamped.
[Supported Printers]
TM-H6000II with scanner