Specifications

EPSON

TITLE

EPSON Advanced Printer Driver for TM series

StatusAPI

Reference Manual

Revision

SHEET

3.15. BiResetCounter

[Function]

Resets the maintenance counter.

[Format]

int BiResetCounter(int nHandle, BYTE writeno)

[Argument]

int nHandle

Specifies the handle value of the printer being accessed. The BiOpenMonPrinter() return value is used in the handle value.

BYTE writeno

Specifies the number of the maintenance counter.

[Return value]

0 is returned when printer reset is successful. The following error codes (less than zero) are returned when an error is

triggered.

ERR_HANDLE The handle value specified for the printer is incorrect.

ERR_TIMEOUT A time out error occurred.

ERR_ACCESS Reading/writing with the printer is not possible (printing in progress).

ERR_PARAM Parameter error (specified counter number outside of permissible range)

ERR_NOT_SUPPORT Not supported

ERR_OFFLINE It was opened in the offline state, so it cannot be used until the online state i

ERR_NOT_EPSON Cannot be used (printer not EPSON)

[Explanation]

Refer to

BiGetCounter

assigned with TM printer.Only valid for counters that can be reset.

Certain printers are not equipped with maintenance counters. A timeout error will be triggered for this function in this event.

[Supported printer]

TM-T90, TM-L90, TM-H5000II, TM-U675, TM-H6000, TM-H6000II, TM-J8000, TM-J2000/2100, TM-J7000/7100,

TM-H3000(R),