Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
28
SHEET
27
[Explanation]
In the TM-H5000II, a maintenance counter is assigned as shown below. Depending on the model, there are counter values
which cannot be acquired, but please read the product specifications for each model.
Counter No.
Counter Counter Model
Hexadecimal Decimal
0A 10 Number of paper feed lines (slip) Can be reset
0B 11
Number of printed characters (slip)
Can be reset
14 20
Number of paper feed lines
(roll paper)
Can be reset
15 21
Number of times the head is charged (roll
paper)
Can be reset
32 50
Number of times the auto cutter is
operated
Can be reset
3C 60 Number of times the check is read Can be reset
46 70 Product operation time Can be reset
8A 138 Number of paper feed lines (slip) Cumulative
8B 139 Number of printed characters (slip) Cumulative
94 148
Number of paper feed lines
(roll paper)
Cumulative
95 149
Number of times the head is charged (roll
paper)
Cumulative
B2 178
Number of times the auto cutter is
operated.
Cumulative
BC 188 Number of times the check is read Cumulative
C6 198 Product operation time Cumulative
If this function is executed in a model in which a maintenance counter is not installed, it results in a time out error.
[Supported printer]
TM-T90, TM-L90, TM-H5000II, TM-U675, TM-H6000, TM-H6000II, TM-J8000, TM-J2000/2100, TM-J7000/7100,
TM-H3000(R)