Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
K
NEXT
3
SHEET
2
that Online recovery
occurred and reset was
completed.
Offline state remains as is.
It remains in the No Response
state.
but the Offline state remains as is. below.
No Response
→
Without cause Offline
→
Online
If there is an error,
No Response
→
Without cause Offline
→
With
cause Offline
The intermediate Status may not
be sent back depending on the
conditions.
BiGetOfflineCode No cause is sent back. The function can get data normally.
The latest Offline cause is sent
back.
The function ends normally, but
the Offline cause is not sent back.
The function ends normally, but
the Offline cause is not sent back.
The cause cannot be acquired if
it is not done approximately 500
msec after reset.
BiGetCounter The counter value is
acquired normally.
ERR_TIMEOUT is made a return
value, then the function ends.
ERR_ACCESS is made a return
value, then the function ends.
ERR_OFFLINE is made a return
value, then the function ends.
ERR_ACCESS is made a return
value during sending of print
data from the driver, then the
function ends.
BiResetCounter The counter value is reset
normally.
ERR_ACCESS is made a return
value, then the function ends.
ERR_OFFLINE is made a return
value, then the function ends.
ERR_ACCESS is made a return
value during sending of print
data from the driver, then the
function ends.
BiGetType The ID is acquired
normally.
ERR_TIMEOUT is made a return
value, then the function ends.
ERR_ACCESS is made a return
value, then the function ends.
ERR_OFFLINE is made a return
value, then the function ends.
ERR_ACCESS is made a return
value during sending of print
data from the driver, then the
function ends.
BiMICRSelect
DataHandling
BiMICRReadCheck
BiMICRCancelWait
CheckInsertion
BiMICRRetrans
missionCheckData
BiMICREjectCheck
BiMICRLoadheck
BiMICRCleaning
Set normally. The function ends normally, but the
parameter is not set. It is reset when
Online recovery takes place.
The function ends normally, but
the parameter is not set
ERR_OFFLINE is made a return
value, then the function ends.