Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
108
SHEET
107
“20010409130010.010,RPN,00000055CRLF” …<4>
“20010409130010.300,RDI,00000055,1CRLF” …<5>
“20010409130010.310,RDO,00000055,1,xxCRLF” …<6>
“20010409130010.320,RDI,00000055,1CRLF”
“20010409130010.330,RDO,00000055,1,xxCRLF”
“20010409130010.340,RDI,00000055,1CRLF”
“20010409130010.350,RDO,00000055,1,xxCRLF”
“20010409130010.360,RDI,00000055,1CRLF”
“20010409130010.370,RDO,00000055,1,xxCRLF”
“20010409130010.380,RDI,00000055,1CRLF”
“20010409130010.390,RDO,00000055,0,00CRLF”…<7>
“20010409130010.400,EDD,00000055CRLF”…<8>
<1> shows that a print start request was sent to the port monitor.
<2> shows that 4096 bytes of print data were written to the port monitor and that the print data were written to
“EpsStmMon.bin.”
<3> shows writing of 4096 bytes in response to the write request to the port monitor was completed.
Thereafter, writing of print data is repeated.
<4> shows that there was a printer reset request from the API.
<5> shows 1 byte of a status reception request to the port monitor.
<6> shows that 1 byte of data xx was received from the port monitor.
Thereafter, status reception is repeated.
<7> shows a return from the port monitor indicating that there are no reception data.
<8> shows that a print end request was sent to the port monitor.