Specifications

No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
StatusAPI
Reference Manual
Revision
L
NEXT
103
SHEET
102
4.2.Registry Details
The log is output in accordance with the contents that are already set in the Registry. When the Registry is corrected and the
OS is rebooted, the new settings become valid. (The Registry may be corrected unintentionally and the OS may not start.
Be sure to create a backup copy before correcting the Registry.)
Also delete existing log files in advance if you are correcting this Registry.
A tool for changing this registry is provided separately. Use it for your convenience.
• Key: HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\SD APD
Name Type Pre-dete
r-mined
value
Example
of Data
Explanation
LogPath REG_SZ \windo
ws
C:\log Specifies the log output destination path. The number of
characters that can be specified is 240 or less.
No log is output if nothing is specified, or if the directory does
not exist.
LogLevel REG_DWORD 111 1 Specifies the log output level
0x00000001: API function sequence output to EpsStmApi.log
0x00000010: Port I/O data output to EpsStmMon.log
0x00000100: Print data output to EpsStmMon.log and
EpsStmMon.bin
0x00001000: Image reading data output.
(EpsScnImg.bin, EpsScnImgR.bin from output)
Specifications which combine the above bits are possible.
If anything other than the above bits is specified, it is regarded
as if 1 was specified.
MaxLogSize REG_DWORD 5120 5120 Specifies maximum text log size (Kbyte).
The specifiable range is 1 to 10240.
If a value outside the above range is specified, it will be
regarded as if 5120 was specified.
Since this specified size is the minimum guaranteed size, the
actual file size may become larger depending on the final
record length.
MaxBinFile REG_DWORD 3 3 Specifies the maximum number of binary log files.
The specifiable range is 1 to 9.
If a value other than a value in the above range is specified, it
is regarded as if a 3 was specified.
The size of this file is in accordance with 1 job of print data.
APRegKey REG_SZ None HKEY_L
OCAL_
MACHI
NE\SOF
TWARE\
NEC\WA
VE\RAS
Specifies an application inherent registry key which shows the
same setting contents as the above log settings.
If nothing is specified, or if the key does not exist, the
application inherent setting is disregarded, and the setting is in
accordance with the HKEY_LOCAL_MACHINE\
SOFTWARE\EPSON\SD setting. If each of the values
preceding the specified value are incorrect, (values which are
not in the specification range) and in the case that the
HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\SD APD
setting is a value within the correct range, this value is used.