Specifications

EPSON

TITLE

EPSON Advanced Printer Driver for TM series

StatusAPI

Reference Manual

Revision

SHEET

3.72.BiSetDefaultEchoTime

[Function]

Sets the number of response confirmations and the length of 1 time out.

[Format]

int BiSetDefaultEchoTime( BYTE Count, WORD Timeout)

[Argument]

BYTE Count

Specifies the number of response confirmations. (0 < Count

≤

255)

WORD Timeout

Specifies the length of 1 time out (Millisecond units (0 < Timeout

≤

65535)

[Return value]

0 is returned when changing the interval to get information from the printer is successful. The following error codes (less than

zero) are returned when an error is triggered.

ERR_PARAM Specified interval in milliseconds is less than or equal to zero.

ERR_REGISTRY Registry Error

[Explanation]

Immediately after StatusAPI is installed, the number of times is 1 time and the timer out duration is 1 second. The value set by

this function is enabled when BiOpenMonPrinter ( ) is called the next time. Also, this function is enabled only when

connected through Ethernet.

[Supported printer]

TM-T88II, TM-T88III, TM-T90, TM-L90, TM-H5000II, TM-U590, TM-U675, TM-H6000, TM-H6000II, TM-J8000,

TM-J2000/2100, TM-J7000/7100, TM-U230, TM-U210A, TM-U325, TM-U950, TM-U295, TM-L60II