Specifications

4-16 Programming Guide/Tips
Confidential
Note:
Half dots are printed when printing on slips in the normal mode (m = 0). Therefore, consecutive dots are
not printed.
Note:
When slips are printed in page mode, the normal mode (m = 0) cannot be specified.
NV Bit Image Command: FS q
This command stores bit data in the TM printer’s non-volatile memory. Please note that all data
cannot be stored at one time. You can save bit images for both paper roll and slip, but you must
manage which image is used in which mode for printing.
Command configuration
FS q n [ xL xH yL yH d1 ¨¨¨¨ dk ]1 ¨¨¨¨ [ xL xH yL yH d1 ¨¨¨¨ dk ] n
(Value of
k
changes depending on
xL
,
xH
,
yL
,
yH
.)
Data handling
Handling of bit image data is the same as with the
GS
✻
command.
NV Bit Image Command: FS p
Data stored in NV memory is printed with the
FS p
command.
Command configuration
FS p n m
Normal Mode Printing
Double Horizontal Mode Printing
Not printed