Specifications

2-12 Hardware
Confidential
Printing and Cutting Positions
Printing and cutting positions
NOTE:
Numeric values used here are typical values; the values may vary slightly as a result of paper slack or
variations in the paper. Take this into account when setting the cutting position of the autocutter.
MICR Reader (When the Printer is Used with the MICR Reader)
Reading method
Magnetic bias
Recognition rating
98% or more (at 25 °C, 77 °F)
Recognition rating is defined as follows
• Check paper used for test is EPSON standard check paper.
• Checks must be flat, without curls, folds, or wrinkles.
Inserting direction and endorsement printing
❏
Insert the check with the surface printed with the magnetic ink upward, following the slip
side guide.
❏
The printer can perform endorsement printing.
Approx. 27
Approx.13
Manual cutter position
Autocutter head position
Center of the print dotline
Paper feed direction
[Units: mm (All the numerical values are typical.)]
Total number of checks
−
(
number of sheets misread or not identified.
)
Reco
g
nition ratin
g
(
%
)
=
Total number of checks
×
100